Electric Service Installations

For new electric installations, please call us at 360-452-9771 or 800-542-7859 and we will refer you to a PUD Serviceman to begin the process of providing you with an estimate for a new installation of electric service to a property. If you are requesting information about water availability to a property or a new water service estimate please complete our water online request form.


For Developers: 

Economic Development Power Capacity Map

The Economic Development Power Capacity Map (EDPCM)  is available for developers, and it provides approximate locations in the Clallam PUD service territory that can provide power at various levels with costs for off-site electric system infrastructure in an amount usually under $10,000/MW. Capacities given may change over time, and no guarantees given related to system upgrade costs. Please contact Clallam PUD engineering department to verify available capacity.  To realize the substation capacity will incur additional line extension cost that will increase as the distance from the substation increases.

Legend

  • Substation Capacity represents available capacity of substation transformer (1.1 pu).
  • MW Capacity Remaining represents available line capacity color coded by MW.
  • 1 MW = 1000KW

Important information about new construction electric meter connects:

Temporary Service connects:

  • Customer must have an estimate from the area serviceman if the fees had not previously been paid, costs may change based on estimate date.
  • Location must have a 911 address
  • Once L & I has approved, fill out and submit the form below.

Temporary to Permanent Service connects:

  • Location must have a 911 address if it is not already provided
  • Once L & I has approved, fill out and submit the form below.

Permanent Service connects:

  • Customer must have an estimate from the area serviceman if the fees had not previously been paid, costs may change based on estimate date.
  • Location must have a 911 address if it is not already provided
  • Once L & I has approved, fill out and submit the form below.

Existing Service connects that have been disconnected more than 12 months:

  • Location must have a 911 address if it is not already provided
  • Verify if any meter base work has been identified by the PUD before reconnecting service.
  • Once L & I has approved, fill out and submit the form below.

Once the meter is ready to be connected, you can submit the following form. This will require the L & I permit number (usually submitted by the electrician or contractor.):